cn
彩影
全新開發,Polaroid SX70, 600, 1200 Image及Spectra相機專用黑白膠片

繽紛燦爛的彩色動感
隆重登場 PX彩影(初版)

當Impossible 在寶麗來位於荷蘭恩斯赫德(Enschede, NL)舊工場埋首開發全新彩色膠片時, 開發人員縱使沖滿期望, 也曾經一度認為要重新創造結構繁複的即影即有膠片是不可能的事。 但得到了德國Inoviscoat公司傑出的技術團隊協助, Impossible只花了短短一年, 就將”不可能”變成”事實”, 成功開發了全新研發的彩色膠片 ﹣ PX70彩影(初版)﹣ Impossible家族的最新成員。

8
個令你享受繽紛色彩的步驟
使用PX70彩影指南

  1. 選用合適照相機
    PX70彩影雖為寶麗來SX70機種研發的專用膠片, 但亦提供了極佳的曝光寬容度, 膠片可同時供600機種使用, 雖有輕微欠曝, 只雖將600系機身上光暗調整旋鈕調到最光(白色)就能達到適中的曝光結果。
  2. 調校光暗調整旋鈕
    使用SX70機種時,旋鈕調到中間位置。 使用600機種時, 旋鈕調到最光(白色)以達最佳效果。 須增曝時旋鈕調到最光(白色)須減曝時旋鈕調到最暗(黑色)。
  3. 抓緊照相機, 光度不足時請加倍注意!
  4. 按快門
  5. 遮蓋照片, 避免受光
    當照相機吐出照片時,請立即掩蓋(例如用你的手、黑卡或者讓照片吐進盒子內), 避免讓照片受光, 照片吐出來首十秒最為關鍵, 其後讓照片在全黑環境中進行顯像最少兩分鐘。
  6. 深呼吸, 然後將顯影完成的照片反過來, 慢慢欣賞你的彩影照片。
  7. 成像後照片上出現的不尋常粒子及色斑, 一般會於24小時後消褪 – 照片上的色彩及相片整體畫質會慢慢提昇, 甚至會於顯像數天後才會穩定下來。
  8. 敬請注意現時運送的膠片已進行了維期5週的質量檢測, 結果顯示照片畫質是穩定的。 照片完全顯像後, 請保持照片乾爽  。 你可以在照片背面開切口或將照片的顯像及成像層分離, 然後連同乾燥包置於不透光儲存盒內。

How to use PX 70 Color Shade

Truth be told, the speed (light sensitivity) of this film is not totally where we expected it to be for the average SX 70 camera, and especially in bright summer light, the tendency for overexposed images is high. So please make sure to adjust the lighten/darken wheel of your SX 70 camera to the darkest setting. With a little experimentation, you will find the right darken setting for your camera.

This slightly high film speed will yield simply amazing color and tones in your correctly exposed SX 70 pictures, but it also opens up the amazing possibility to use this magic material in your 600 camera without the need of any additional filters! Simply insert the film in your Polaroid 600 camera, if necessary, add a little lighten adjustment and surround yourself with colors!

See more tutorial videos

不可見光
彩影

放心, 我們其實都是光明磊落的, 但由於彩影膠片都光源非常敏感, 照相機吐出照片時請立即掩蓋, 避免讓照片受光, 首十秒最為關鍵!!
要照片避免受光有很多方法, 如用手掩蓋、利用黑卡或讓照片直接吐進盒子內。 我們的一位老朋友, 亦是我們第一位認可的Impossible膠片操控專家 Beppe Bolchi, 就發明了SX70及SLR680專用的紙板遮光裝置:

See more tutorial videos