PLEASE SELECT YOUR LOCATION:
GETTING
STARTED
First Instant
Steps
  • Konto
  • Merkliste
  • basket

Facebook Tweet about this Google

Frog Tongue for 600 Cameras

Die Impossible Frog Tongue ist eine neues Mittel, Ihre Impossible Bilder nach dem Auswurf aus der Kamera automatisch vor Licht zu schützen und lässt sich ganz einfach mit allen box-type Polaroid 600 und SX-70 Kameras verwenden.
Diese raffinierte Vorrichtung verbessert enorm die Ergebnisse, die Sie mit den aktuellen Impossible Filmen erreichen können.

Die Frog Tongue ist auch in einer größeren Version für Polaroid Image/Spectra Kameras erhältlich.
Übersicht
Specs
Schnellstart
Produkteigenschaften
    Die Impossible Frog Tongue funktioniert mit allen box-type Polaroid Kameras (635, 645, OneStep, 1000,etc.). Sie ist nicht geeignet für die zusammenklappbare one 600 Polaroid!
Bearbeiten Sie die originale Frog Tongue Ihrer Kamera, indem Sie den schmalen Plastikstreifen Ihrer Kamera am Anfang des Bildauswurfschlitzes ablösen (benutzen Sie ein scharfes Hilfsmittel,z.B. einen kleinen Schraubenzieher etc.). Anschließend können Sie die originale Frog Tongue gegen die neue,längere Impossible Frog Tongue austauschen und den Plastikstreifen wieder in die Anfangsposition setzen.

Für den genauen Ablauf siehe bitte auch: Frog Tongue video
All box-type 600 and box-type SX 70 cameras (636, 600 One Step, Model 1000, OneStep, etc)
It does not work with the the foldable Polaroid one 600 model or any foldable SX-70 models.
Verfügbarkeit :
517 Artikel

Kundenrezensionen

DURCHSCHNITTLICHE BEWERTUNG: (86.15 %)   28 Rezensionen
does not work
028
this does not fit in my spirit camera. waste of money
sagt mike taylor, US | 2013.05.19 19:54 PM
Hilfreiche Rezension? Ja / Nein
it will definitely fit in your camera - please write us a short email to - service@the-impossible-project.com
Impossible Reply to mike taylor, 2013.05.21 10:43 AM
@ Polaroid Impulse AF
027
Works with Polaroid Impulse AF ... all you need is a Cutter / Sharp Knife and Cut one little hole more into the tongue aaaaand it works perfectly! Best accessory ever!
sagt Kim S., CH | 2013.01.24 18:52 PM
Hilfreiche Rezension? Ja / Nein
WORKS ON MY JOB PRO 600
026
I was disappointed to hear that Impossible does not recommend using the frog tongue on folding One600 cameras.... Turns out, instead of a swiss army knife you need a small screw driver and a little more patience. THIS TOTALLY WORKS! Following a suggestion- I looked at the front hinge mechanism The part that drops down to load the film cassett is actually just on two pins, by gently prying them left and right you can release the film door. From there simply use the screw driver from an eye glasses repair kit ($1.99) to remove the four screws that secure the faceplate.... separate the two plastic parts and voila! you can exchange your frog tongue. Took me about 15 minutes to work out the first time... 2 minutes the second time (after I put the frog tongue on backwards) This is the PERFECT way to shield your impossible images Good luck!
sagt Cliff, US | 2012.12.02 03:42 AM
Hilfreiche Rezension? Ja / Nein
Reusable?
025
It would be really helpful if i didnt have to keep having to buy more and more to replace the frog tongues. Are they reusable? If so, how many times can it be reused?
sagt Elaine, US | 2012.10.25 23:59 PM
Hilfreiche Rezension? Ja / Nein
why do you have to keep replacing the frogtongue? the idea is to exchange the original frogtongue with the new, longer Impossible frogtongue once. you will never have to replace it again.
Impossible Reply to Elaine, 2013.03.03 17:25 PM
Makes shooting so much easier!
024
this makes shooting as easy as with original Polaroid film, and now I don't have to worry at all about shielding anything. I did have to cut a few extra slots in the top because it didn't quite line up with the slots on my sx-70 box type camera though. Not a big deal!
sagt Jessica Hobin, CA | 2012.06.28 20:37 PM
Hilfreiche Rezension? Ja / Nein
does work with Polaroid One 600
023
works with Polaroid One 600, just not with One 600 Classic, One 600 Pro and One 600 Jobpro.
sagt jorian, NL | 2012.06.01 01:42 AM
Hilfreiche Rezension? Ja / Nein
How to make your own
022
You can make one yourself out of wrapping paper and scissors, that's all! It works just as well as the impossible ones. Just trace a template of an impossible photo add 10 mm onto the end ( plus the bit whith the holes ) cut and punch the nessasery holes. Then roll it up on a kebab stick and then peg it down at both ends. Get an iron and lightly steam. Then get the tip of the iron and rub lightly all the way around 3-5 times or until it rolls back into place when un rolled. Then your right to fix it into the camera. The best part is you can pick any pattern. (I used a jelly bean pattern)
sagt Ben Hammond, AU | 2012.05.29 10:13 AM
Hilfreiche Rezension? Ja / Nein