IMPOSSIBLE - accessories: Frog Tongue for 600 Cameras

Frog Tongue for 600 Cameras

The Impossible Frog Tongue is a newly designed, reusable device that easily attaches to all box-type Polaroid 600 and box-type SX-70 cameras and automatically shields Impossible instant pictures from light as they eject from the camera. This nifty device greatly improves the results you can achieve with the current Impossible instant films. We do not recommend to install the Impossible Frog Tongue into the folding type Polaroid One 600 models.

NOTE: Some models, such as the Sun 660 and the Spirit 600 require that you cut a small hole in the top strip of the frog tongue to accomodate an extra prong on the back of the faceplate.

The Frog Tongue is also available in a larger version for Polaroid Image/ Spectra cameras.

overview

specs

quick start

Product Specifications

Carefully access the original frog tongue of your camera by removing the small plastic strip on top of the picture ejection slot (use a sharp object like a small screwdriver or the like). You will then be able to exchange the original frog tongue with the new longer Impossible frog tongue and to snap the plastic strip back into position.

Please also watch this Frog Tongue video that demonstrates the procedure.

All box-type 600 and box-type SX 70 cameras (636, 600 One Step, Model 1000, OneStep, etc)
It does not work with the the foldable Polaroid one 600 model or any foldable SX-70 models.

Availability :

518 items

buy

13.99 US $

+ ADD TO WISHLIST

CUSTOMER REVIEWS

WRITE A REVIEW

AVERAGE RATING:

(86.15 %) 28 reviews

	does not work
028	this does not fit in my spirit camera. waste of money
	said mike taylor, US \| 2013.05.19 19:54 PM Review helpful? yes / no

it will definitely fit in your camera - please write us a short email to - service@the-impossible-project.com

Impossible Reply to mike taylor, 2013.05.21 10:43 AM

	@ Polaroid Impulse AF
027	Works with Polaroid Impulse AF ... all you need is a Cutter / Sharp Knife and Cut one little hole more into the tongue aaaaand it works perfectly! Best accessory ever!
	said Kim S., CH \| 2013.01.24 18:52 PM Review helpful? yes / no

	WORKS ON MY JOB PRO 600
026	I was disappointed to hear that Impossible does not recommend using the frog tongue on folding One600 cameras.... Turns out, instead of a swiss army knife you need a small screw driver and a little more patience. THIS TOTALLY WORKS! Following a suggestion- I looked at the front hinge mechanism The part that drops down to load the film cassett is actually just on two pins, by gently prying them left and right you can release the film door. From there simply use the screw driver from an eye glasses repair kit ($1.99) to remove the four screws that secure the faceplate.... separate the two plastic parts and voila! you can exchange your frog tongue. Took me about 15 minutes to work out the first time... 2 minutes the second time (after I put the frog tongue on backwards) This is the PERFECT way to shield your impossible images Good luck!
	said Cliff, US \| 2012.12.02 03:42 AM Review helpful? yes / no

	Reusable?
025	It would be really helpful if i didnt have to keep having to buy more and more to replace the frog tongues. Are they reusable? If so, how many times can it be reused?
	said Elaine, US \| 2012.10.25 23:59 PM Review helpful? yes / no

why do you have to keep replacing the frogtongue? the idea is to exchange the original frogtongue with the new, longer Impossible frogtongue once. you will never have to replace it again.

Impossible Reply to Elaine, 2013.03.03 17:25 PM

	Makes shooting so much easier!
024	this makes shooting as easy as with original Polaroid film, and now I don't have to worry at all about shielding anything. I did have to cut a few extra slots in the top because it didn't quite line up with the slots on my sx-70 box type camera though. Not a big deal!
	said Jessica Hobin, CA \| 2012.06.28 20:37 PM Review helpful? yes / no

	does work with Polaroid One 600
023	works with Polaroid One 600, just not with One 600 Classic, One 600 Pro and One 600 Jobpro.
	said jorian, NL \| 2012.06.01 01:42 AM Review helpful? yes / no

	How to make your own
022	You can make one yourself out of wrapping paper and scissors, that's all! It works just as well as the impossible ones. Just trace a template of an impossible photo add 10 mm onto the end ( plus the bit whith the holes ) cut and punch the nessasery holes. Then roll it up on a kebab stick and then peg it down at both ends. Get an iron and lightly steam. Then get the tip of the iron and rub lightly all the way around 3-5 times or until it rolls back into place when un rolled. Then your right to fix it into the camera. The best part is you can pick any pattern. (I used a jelly bean pattern)
	said Ben Hammond, AU \| 2012.05.29 10:13 AM Review helpful? yes / no

SHOP

Frog Tongue for 600 Cameras

CUSTOMER REVIEWS